LCD color display, 320 x 240 pixels. 7.2 cm x 5.4 cm
Bandwidth
1 Hz to 30 Hz (-3dB), nominal (non-diagnostic)
Monitored Lead
Lead II using anterior-anterior adult pads placement
Physical Size
6.9 cm x 13.5 cm x 22.1 cm
Weight
1.6 kg with FR3 standard battery installed
Environmental/physical requirements
Sealing
Meets IEC529 class IP55 with battery installed
Temperature
Operating/standby: 0�� 50�C
Altitude
0 �15,000 feet (0 �4,572 meters)
Shock/drop
Meets MIL-STD-810F 516.4, Procedure IV
Abuse tolerance
(After a ibe-meter drop to any edge, corner, or surface in standby mode)
Vibration
Meets MIL-STD-810F 514.5 C-17
Bluetooth 2.0 Class II Wireless Transceiver Module
Function
Transmit retrospective event data or configuration setting wirelessly
Patient analysis system
ECG analysis
Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker
SMART CPR
Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock
Sensitivity/specificity
Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation
Quick Shock
Typically arms in <8 seconds from the end of the "Stop CPR" prompt
FR3 primary battery
Type
12 VDC, 4.7 Ah, lithium manganese dioxide long-life primary cells
Capacity
Typically 300 shocks or 12 hours of operating time at 77� F (25� C) when configured for monitoring after No Shock Advised (NSA)
7.5 hours of operating time at 25� C when configured for CPR after NSA
Standby life
3 years minimum when stored under standby environmental conditions (battery installed)
Shelf life
5 years
SMART Pads III
Applications
Disposable, multifunction defibrillation pads for adult or infant/child patients. Time-saving peel and place pads can be removed from packaging and stored in the FR3 carry case. Pads can be preconnected to FR3, which enables testing during FR3's routine self-test.
Infant/Child Key (optional)
Function -Selects therapy for infants or children under 25 kg or 8 years old
FR3 data card
Function-Stores a minimum of 8 hours of ECG, event, and if configured, voice recording. Can also be used for configuring FR3.
Automated and user-activated self-tests
Automatic self-tests
Test internal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery
Automated self-test frequency
Daily, weekly, monthly, power on, and runtime during all modes of operation
User initiaited tests
Automatic self-tests plus tone, display, and button performance
FR3 training battery and training pads (optional)
Function-Places FR3 into a scenatio-based training mode and simulates shock therapy
Type 10.8 Volt, 4.5 Ah Li-ion battery